Rudra Pratap
Professor and Chairperson, CeNSE

Program Coordinators
Sanjeev Shrivastava
S A Shivashankar

Training Coordinator
Akshay Naik

Local Advisory Committee
K N Bhat
S Mohan
Navakanta Bhat
K J Vinoy
V Venkataraman

Local Organizing Committee

  • Y P Prabhakara Rao
  • Vijay Mishra
  • Sunanda Babu
  • Gopal Hegde
  • Savitha P
  • Smitha Nair
  • Sangeeth K
  • Siva P
  • Sabiha Banu
  • Varadaraju P
  • Suma B N
  • T Ravi Naik
  • R N Narahari
  • Somashekhar P S
  • Narmdeshwar Pandey
  • Ragkhee Manoj
  • Aravinda BN

Contact us:
Course Coordinator:
Dr. Sanjeev Kumar Shrivastava
CeNSE, IISc, Bengaluru-560012
Tel: 080-23603281, 23600209
Email: sanjeevs@iisc.ac.in


Participants list for STIP 2019 program is available here.
Program Schedule for STIP 2019 program is available here.

A Special Training Course in Nanofabrication Technologies

17 Jan - 03 February 2016

Flyer Training Schedule

Over the past few years, India’s role in promoting and assisting development in the neighbouring countries has increased substantially. Beginning with his swearing in, Prime Minister Narendra Modi has repeatedly emphasised the need for close collaboration among countries in the neighbourhood. One of the areas that needs significant strengthening of ties among countries in our neighbourhood is science and technology. Inadequate availability of essentials like safe drinking water, public health facilities, and energy are some of the problems that are common to all neighbouring countries. Closer interaction in these domains will not only foster exchange of ideas and promote active research in these areas but would also strengthen people-to-people bond.

In this regard, through financial sponsorship by the Development Partnership Administration-II Division under Indian Technical & Economic Cooperation Programme (ITEC), of Ministry of External Affairs, and in consultation with the Ministry of Electronics and Information Technologies (MeitY), Govt. of India, we are holding the 3rd Special Training Course in Nanofabrication Technologies for ITEC countries at the Centre for Nano science and Engineering, Indian Institute of Science. CeNSE was dedicated to the nation by the Prime Minister in the month of Feb 2015 and was established with support from MeitY to promote research and education in nano science and engineering. The Centre would like to help foster greater interaction among neighbouring countries through the special course being conducted (which may later become a Regular Program) in the very important contemporary field of nano science and technology, by providing training and access to its facilities.

The objective of this special course will be to train scientists on both the theoretical and practical aspects of nano-fabrication technologies, “starting from the cleaning of wafers to the packaging of devices". The reach of this course will likely be extended to a large number of institutions and participants through a variety of new and expanded initiatives, viz., training at different levels in Nanoelectronics to scientists from institutions in ITEC countries. The training program will be as follows:

(1) Basics of Nano Science and Technology:
Lectures by faculty members will provide an overview of various aspects of nano science and technology.

(2) Practical Hands-on Training
Participants will be provided with practical training in the National Nano Fabrication Facility (NNfC) and the Micro and Nano Characterisation Facility (MNCF), both at CeNSE. The NNfC houses a clean room with class 100 and class 1000 segments (a class 100 clean room, for example, is designed to allow no more than 100 particles (0.5 micron or larger) per cubic foot of air). Such clean rooms are critical to the fabrication of devices in the sub-micrometer regime. The NNfC houses a range of equipment, such as, electron beam lithography systems, mask aligners, laser writers, reactive-ion etching systems, a deep reactive-ion etching system, CVD furnaces, and wet chemical processing benches. The Micro and Nano Characterisation facility (MNCF) houses a suite of equipment, such as RF/DC probe stations, scanning electron microscopes, atomic force microscope, X-ray diffractometers, and a micro-Raman spectrometer for the electrical, optical, mechanical, and materials characterization of devices and structures fabricated. The participants would be provided hands-on training via the following two distinct modules. (a) Fabrication of a MEMS cantilever (b) Fabrication of a silicon solar cell, together with practical training in the MNCF.

Eligibility Criteria:

i. Participants must belong to one of the ITEC countries.
ii. Participants should have a Bachelor’s degree (from a recognized University) in any branch of Science and Engineering.
iii. Participants should either be a member of faculty who is teaching courses/involved in research related to Physics, Chemistry, Materials, Electronics and Communications, Electrical Engineering, and Nanotechnology, or must be a student registered for the Master’s/Ph.D. degree in Science and Engineering in an accredited academic institution/university in one of the neighbouring countries.

Last Date of receipt of application (ONLINE): 10th December 2015. For more details, please visit the website

All are requested to follow up with the mission with respective country for joining letter and visa.

Link for Online registration : https://www.itecgoi.in/index.php

Instructions to Apply : Click here.                                                                                  Kindly fill the Survey Form.

Please do the following:
Step 1: go to https://www.itecgoi.in/index.php
Step 2: Courses ---> Training Programs 2016-17 ---> Available Streams (Select)
Step 3: Engineering and Technology (Select)
Step 4: Indian Institute Of Sciences (Select)
Step 5: Read the Course Content
Step 6: Apply (Click)
Step 7: Select your country - Proceed (Click)
Step 8: Fill the Personal Details, Educational Details, Employment Details and Medical Details etc.
Step 9: Submit (Click)
Step 10: Contact to ITEC (High mission in your country for submission of documents such as application form, Passport copy for VISA, certificates etc.)
Step 11: After selection, please report to Centre for Nano Science and Engineering (CeNSE), IISc Bengaluru, India, on August 16, 2017 for the Registration.

Each participants are requested to send the poster (42X36 inch) on their research Idea/Work through email to inup.itec@gmail.com

All the supports, such as, Travel, Accommodation, Course Fee, Local Tour Costs will be provided by Indian Govt. through Centre for Nano Science and Engineering, IISc Bengaluru

Once you apply, please go through the Registration Manual and register yourself.

Please send the scanned copy of Registration Form to inup.itec@gmail.com and cc to sansrivastava28@gmail.com

Please send your research proposal in the format attached through e-mail to inup.itec@gmail.com

In any case, if you are facing problem to apply online, please contact help@itecgoi.in and cc to sansrivastava28@gmail.com

Accommodation will be provided from 16th August 2017 onwards till 02nd September 2017 morning.

We invite you, therefore, to consider participating in this Special Training Course meant to initiate further collaboration among scientists of the ITEC countries.